Mohala o pepeneneng o phahameng oa Multi-layer CPE Cast Film Line
*SEKELETSO
CPE cast film line e entsoe hantle ho hlahisa filimi ea polyethylene e hlakileng (filimi ea CPE).E na le sistimi e laolang botenya ba likoloi le moqolo o pholileng oa serame, mohala o hlahisa filimi ea CPE ea pepenene e ntle le phapang e tlase ea gauge, e loketseng bakeng sa ts'ireletso ea laminating le holim'a metsi.Filimi ea 3-layer CPE e tsebahala haholo 'marakeng.
Mohala oa rona oa lifilimi oa CPE o na le litsamaiso tsa dosing tsa gravimetric batch ho tsamaisa lirisiti tsa hau tsa resin ka ho nepahala le ho pheta-pheta.Bongata ba likarolo tsa dosing bo ka lokisoa ka litlhoko tsa hau hantle.Wellson o na le theknoloji e tsoetseng pele lits'ebetsong tsa extrusion.Li-extruder li amohela mefuta e mengata ea li-polymers tsa PE 'marakeng kahoo bareki ba rona ba khona ho sebelisa thepa ea polymer ho tsoa limmarakeng tsa lehae.Re fana ka likhetho tse ngata bakeng sa litsamaiso tsa co-extrusion.3-layer co-extrusion le feedblock ke tekanyetso ea rona bakeng sa filimi ea CPE.Ho netefatsa pepenene e phahameng ea filimi ea CPE, thipa ea moea e entsoeng hantle e aba moea o sa khaotseng holim'a tepo ea filimi ea CPE.
*KOPO
1) Filimi e tlokomang: e tla etsoa laminated ka BOPET kapa BOPA substrate filimi 'me e sebelisetsoe mekotla ea ho paka lijo tse leqhoa kapa mokotla.
2) Filimi e sireletsang: Filimi e sireletsang holim'a LCD, filimi e sireletsang koloi, thepa ea ka tlung kapa ntho leha e le efe e ntle e hlokang tšireletso ea holim'a metsi.
Filimi ea CPE e hlahisoang ke mohala oa lifilimi e na le melemo e itseng ho feta filimi e phatlohileng.CPE e betere haholo ponaletsong, phapang ea botenya le thepa e 'ngoe ea tekheniki.Filimi ea CPE e sebelisoa haholo indastering ea ho paka lijo, thepa ea bareki le ts'ireletso ea holim'a metsi.Ntho ea bohlokoa ka ho fetisisa ke hore mohala oa filimi oa CPE o na le matla a mangata a phahameng ho feta a mochine oa lifilimi, ka hona o tlisa melemo e mengata bakeng sa matsete a mechine ea lifilimi ea CPE.
Ka lebaka la thepa e ikhethang ea filimi ea CPE, lihlahisoa tsa tekheniki tsa filimi ea CPE e laminating ka filimi ea BOPET, filimi ea BOPA e ntse e hola ka potlako 'marakeng.Filimi ea laminated e re tlisetsa melemo e mengata limmarakeng tsa tlhōlisano.
*DITATI TSA BOTHEKELE
| Mohlala No. | Screw Dia. | E-shoa Bophara | Bophara ba Filimi | Botenya ba lifilimi | Lebelo la Mola |
| FME65/110/65-1900 | Ф65mm/Ф110mm/Ф65mm | 1900 limilimithara | 1600 limilimithara | 0.02-0.15mm | 200m/min |
| FME65/120/65-2300 | Ф65mm/Ф120mm/Ф65mm | 2300 limilimithara | 2000mm | 0.02-0.15mm | 200m/min |
| FME90/150/90-3300 | Ф90mm/Ф150mm/Ф90mm | 3300 limilimithara | 3000mm | 0.02-0.15mm | 200m/min |
Maikutlo: Mefuta e meng ea mechini e fumaneha ha u e kopa.
*DAKA LE MELEMO
1) Bophara ba filimi efe kapa efe (ho fihla ho 4000mm) ka khetho ea moreki.
2) Phapang e tlase haholo ea botenya ba filimi
3) In-line filimi bohale trim le recycled
4) Winder ea filimi e ikemetseng e nang le boholo bo fapaneng ba shaft ea moea
